Installation of Starlink Internet This is the topic of this article. In the future, stay with Tekrato to tell you How to install Starlink satellite internet at home?
Maybe you have a question about how to Installation and commissioning of Starlink the payment; If you have a Starlink terminal, it’s not as difficult as it sounds.
Read more:
Installation of Starlink Internet
One of the important goals for Installation and setup of Starlink Internet And satellite internet services are the ease of access in places where fiber lines and cellular networks are not laid, or you may live in a country that loosens and tightens the internet valve. So, in such situations you need something like: Starlink!
How much does it cost to install Starlink?
when for Installation of Starlink Internet When you sign up, you won’t sign an equipment lease like you would with a traditional cable company, for example. Instead, you pre-purchase the Starlink (hardware) kit, which is also relatively expensive (something like $599, plus $50 handling fee) – which makes things more complicated if we want to bring the hardware parts to Iran, but the advantage is Starlink, failure to install equipment is frequent.
If you have come this far and still want to Installation and commissioning of Starlink Take action, you need to set aside about $110 per month for the software and profile services of this service. Unfortunately, there is no long-term contract at the moment, but you can cancel or extend it at any time if needed. However, there are rumors that Starlink Internet in the geographical region of Iran does not require the purchase of a paid account.
Read more:
Starlink Installation: What’s in the Kit?
Everything you need to connect will be in this package: a Starlink dish, a dish holder and a Wi-Fi router unit. Also, a 23 meter long power cable and wire to connect the router to the dish. More accessories are available including; Longer cable and holder stand and adapters to connect to other standard Ethernet.
The contents of the box provide the user with very simple instructions without any text (if we ignore the small text of the URL to the Starlink site, of course). However, no special textual details have been recorded on this page either! For example, you will only see the image of the dish rod in the location of the tripod holder shown to you, and you will have to connect the first strand of the tripod cable to the dish rod.
This cable has two ends at the end, the characteristics of each end are the same, but their connection places have different shapes. Therefore, it makes the user’s job very simple to connect the cable to the dish and finally to the base unit! As far as we know, all ports are dust and water resistant.
The setup process is very quick (it doesn’t take long at least to configure the connections after opening the box) but positioning the dish for optimal performance takes a little longer.
Read more: The Pentagon and the European Union will pay for Ukraine’s Starlink!
Unboxing the Starlink kit
When you first look at the contents of the Starlink box, you will notice few things: only the instructions for setting up the Starlink receiving dish, the stand, the Wi-Fi router and the 23-meter cable to connect the dish to the router are in the box.
The image you see is the new version Starlink dishes They are rectangular, but the original version is circular.
The router is in the box with the power cable, but the dish does not need this power cable; Because another cable is installed to connect power and data.
The Starlink Wi-Fi router is the key to your new high-speed Internet connection, bringing the open world to your home. In fact, you can find a good connection point for your router just by following the same guidelines as standard Wi-Fi routers.
At the bottom there are two connections: one for power and one for connecting to the Starlink dish. There are no other Ethernet ports for wired connections. And instead of the multiple flashing lights you see on a standard cable modem, Starlink Wi-Fi router It has only one indicator that shows you the router is on/off. And it’s not even visible on the front of the device – it’s at the bottom, next to the cable connection. If you want to check that your Starlink system is online, you should use the mobile smartphone app (for Android and iOS).
Read more: Smuggling Starlink equipment to Iran at an astronomical price; New business boom in the shadow of filtering!
How to launch Starlink?
Dish, base and cable assembly in Starlink installation and operation
Once you’ve unpacked your Starlink kit, you’ll need to assemble the dish and mounting base. Get started by disconnecting the connecting cable from the dish: see that connecting cable that goes to the plug? Well, you have to unplug it to put the dish rod into its mounting base.
Then, put the dish rod in the installation base and be careful to lock the groove on the rod with the corresponding rail inside the base well.
Once the rod is in place, connect the 23m interface cable with the straight plug connector. As mentioned, the two ends of the cable are made of connectors of different shapes, which makes it easy for the user to determine the connection point, even if possible.
Be sure to push the cable connector enough to make a good connection. When the plug is properly inserted into the outlet, you should hear a distinct click, like a mouse click!
Positioning for the dish
The next step is to install and place the assembled dish for optimal reception of satellite data.
You can do a good positioning using the Starlink program. This is a kind of software Interactive tool which helps you find the right position of the new dish and stabilize its connection quality. The instructions are so simple that you can easily find the best position.
But there are some things to keep in mind: For this, you need a clear, unobstructed sky, meaning at least 100 degrees of open space above and around the dish. A large strip of clear sky is essential; Because the dish does not maintain a fixed direction; Although you install it in one place, the dish has a motor that adjusts and resets itself to maintain a connection with passing satellites.
Read more: financial aid for the supply of Starlink Internet in deprived areas; Elon Musk’s charity!
Setting up the dish in Starlink installation
After scanning and verifying the position, it will be your turn Installation of the dish arrives (fixed place). Just fix the base of the dish on the ground; But maybe not all of you have the outdoor space I’m talking about, or live in a neighborhood where you can’t park your $600 dish in the yard. Actually, it all depends on you!
The mounting base includes holes in each base for secure screwing. You can use them to attach the base to a ceiling or fixed structure as well as to attach it to the ground. The kit does not include screws, you need to provide them yourself. For alternative mounting options, such as on a pole or your older set of satellite dishes, you only need to purchase an additional adapter.
If you are worried about the weather, especially snow and ice, I have good news for you, the Starlink dish has an internal element and a sensor that senses the freezing point and immediately heats up to remove any frost on the surface of the dish! It’s a struggle, isn’t it?
Connect the cable!
Once the dish is in position, you need to run the cable to the router. For most users, this means running cables indoors.
Personally, for the initial setup, I routed the cable through an open window into the room: this is a simple, temporary solution to the setup task. Other options are also available, such as drilling holes in the outer wall! That is, once you have the cable in your house, you just need to connect it to the Wi-Fi router. Like home ADSL routers.
Read more: Continue serving Starlink to Ukraine despite the financial loss; Elon Musk restricted his interests!
What is the speed of Starlink with all this?
After completing all these steps, you should have access to the Internet, if you don’t have it, check the steps again from the beginning. Just note that the promised speeds may not be available immediately. After starting up, it takes about 12 hours for the Starlink system to reach its desired performance.
During that time, the system Latest drivers Download and Nearby satellites It scans and maps and calculates the optimal positions for communication with various satellites above your head. All of these connections are set automatically, so you don’t have to worry about constantly changing your settings.
Read more:
Your opinion about Installation and commissioning of Starlink What is? Do you think it can be used in Iran? Please share your thoughts and experiences with us in the comments section technology news Follow from Tikrato.
Source: pcmag